Send your DXF: how ordering cut parts works
If you have a drawing of a flat part, we can cut it. The quickest way is a DXF file with the material, thickness and quantity. This page explains which file to send, what to put with it, and the difference between laser and plasma cutting in general terms.

How it works
- 1. Send your drawing. A DXF is best. A DWG or a dimensioned PDF or sketch also works.
- 2. Tell us the material, thickness and quantity. For example mild steel, stainless or aluminium, the plate thickness and how many of each part.
- 3. We check it. We check the drawing and come back about anything that is not clear before we cut.
- 4. Quote. You get a written price for your order.
- 5. Cut, bend, weld, finish. We cut the parts and, if you need it, bend, weld and finish them.
- 6. Delivered with a docket. Your parts are delivered or collected with a docket listing what is in the order.
DXF, DWG or PDF?
- DXF (Drawing Exchange Format) is the standard file for cutting. It holds the lines and arcs of the part outline at full size, and most CAD programs can export it. This is the best file to send.
- DWG is the native AutoCAD format. It can usually be converted, but it may contain several parts, title blocks and dimensions that need cleaning up first.
- PDF or a sketch is fine for a quote, or for simple parts, as long as every dimension is marked. We then draw the part before cutting, which adds a step.
Getting a DXF ready
- Draw at 1:1 scale, in millimetres.
- One part per file, or clearly separated parts with names.
- Closed outlines with no gaps or overlapping lines.
- Remove dimensions, title blocks and text from the cutting layer, or put them on a separate layer.
- Mark holes, slots and any bend lines clearly.
What to include with your order
- Material and grade, for example mild steel S275 or S355, stainless 304 or 316, or aluminium.
- Thickness of each part.
- Quantity of each part.
- Finish: as cut, deburred, galvanised, painted or powder coated.
- Tolerances, if any dimensions are critical, and which holes must line up with other parts.
- Any bending, welding or assembly needed after cutting.
- Whether you need material certificates.
Laser or plasma: the general differences
Both cut steel plate from a CNC program. In general industry terms:
- Laser cutting gives a narrow cut, a fine edge and small, accurate holes. It suits thin and medium sheet and detailed parts where the edge will be seen.
- Plasma cutting is fast on medium and thick plate and suits structural parts such as base plates, gussets and brackets. The edge is rougher and slightly bevelled, and small holes are less precise, so holes for close-fitting bolts may be drilled instead.
- For very thick plate, the edge from any thermal cut may need grinding before welding or painting.
What TopTac does
We cut parts to your drawing and can bend, weld, galvanise or paint them. If your parts are structural, cut and welded under our EN 1090 Factory Production Control, tell us the Execution Class on the drawing. Tell us what the part is for and we will say whether the drawing has what we need. See CNC cutting.
Note
General information about file types and cutting processes. Check your design and tolerances with your engineer or designer.
Got a drawing?
Send the DXF, the material, the thickness and the quantity.
Common questions
What file types can I send?
Can you bend and weld the parts as well?
Got a drawing?
Send the DXF, the material, the thickness and the quantity.
